Panasonic AJ-CX4000G Operating Instructions Manual page 151

AUDIO screen
Displays the audio input/output settings and the recording level.
[MIC POWER(MENU)]
[VOL. SELECT]
[A.IN]
[LEVEL]
[F.VOL.]
[LIMITER]
[LOWCUT]
CAC screen
Displays information about the chromatic aberration compensation function.
[CAC CONTROL]
[CAC MODE]
[CONNECT LENS TYPE]
[SELECT FILE TITLE]
[CAC WARNING]
SWITCH screen
Displays the function assigned to the USER button, <GAIN> switch, and <WHITE BAL> switch as well as the setting value.
[USER SW]
[OTHER ASSIGN]
Chapter 5 Shooting — Display of the viewfinder status
Item
[SLOT3]
Item
[CH1] to [CH4]
[CH1] to [CH4]
[CH1] to [CH4]
[CH1] to [CH4]
[CH1] to [CH4]
Displays the setting value of the [CAMERA] menu → [CAC ADJ.] → [CAC CONTROL].
[STOP] is displayed when the chromatic aberration compensation function is not active due to conditions of the data or
the lens even if set to the [CAMERA] menu → [CAC ADJ.] → [CAC CONTROL] → [ON].
Displays the operation mode of the chromatic aberration compensation function.
f [AUTO]: The CAC file is automatically selected.
Displays the lens ID of the currently connected digital lens.
Displays the title and the file version of the CAC file currently used for chromatic aberration compensation.
Displays a warning when operation of the chromatic aberration compensation has stopped.
f [CAC LENS DATA INVALID]: This is displayed, for example, when the response data from the lens is not supported.
f [LENS INITIALIZATION NOT COMPLETED]: This is displayed, for example, when initialization of the lens cannot be
completed.
Item
[1] to [5]
[RET SW]
[GAIN L]
Displays the remaining capacity (%)/remaining capacity (minutes)/total
recording time of the memory card inserted in card slot 3.
It is not displayed when set to the [NETWORK] menu → [NETWORK FUNC] →
[NDI|HX].
The status of the memory card that is displayed are following types.
f [NO CARD]: Memory card is not inserted.
f [UNSUPPORTED]: Memory card is not supported.
f [FORMAT ERROR]: Memory card cannot be used. (Format error)
f [PROTECTED]: It is write protected. The write-protected switch of the
memory card is set to the LOCK side.
f [NO REMAIN]: Memory card has no remaining capacity.
f [NOT SDXC]: Recording mode is set to MOV but SDXC memory card or
64 GB microP2 card is not inserted.
f [ENCRYPTED]: microP2 card formatted with encryption with CPS password
is inserted.
In cases other than above, the remaining capacity of the memory card is
displayed in 0% through 100%.
Displays the setting value of the [AUDIO] menu → [INPUT SETTINGS] →
[FRONT MIC POWER] and the [AUDIO] menu → [INPUT SETTINGS] →
[REAR MIC POWER].
Displays the setting value of the [AUDIO] menu → [REC CH SETTINGS] →
[VOL. SELECT].
Displays the audio input signal selected with the <AUDIO IN CH1> to <AUDIO
IN CH4> switches.
Displays the recording level adjustment method of each channel.
f [AUTO]: Automatic adjustment
f [VOL.]: Manually adjusted by the <AUDIO LEVEL CH1/3>/<AUDIO LEVEL
CH2/4> dial
f [MENU]: Manually adjusted by the [AUDIO] menu → [REC CH SETTINGS]
→ [CH1 LEVEL CONTROL] to [CH4 LEVEL CONTROL]
Displays whether the <F.AUDIO LEVEL> dial is enabled in each channel.
f [ON]: Enabled
f [OFF]: Disabled
Settings in the <AUDIO IN CH1> to <AUDIO IN CH4> switch and the
[AUDIO] menu → [REC CH SETTINGS] → [FRONT VOL. CH1] to [FRONT
VOL. CH4] does not match.
f [---]: Disabled
The channel is not selected in the [AUDIO] menu → [REC CH SETTINGS] →
[VOL. SELECT].
Displays enable/disable of limiter for each channel with [ON]/[OFF].
Displays [---] when recording level adjustment method is automatic adjustment.
Displays enable/disable of low-cut filter for each channel with [ON]/[OFF].
Displays the function assigned to the <USER 1> through <USER 5> buttons.
Displays the function assigned to the <RET> button of the lens.
Displays the gain value assigned to <L> of the <GAIN> switch.
– 151 –
Description
Description
Description