Panasonic AJ-CX4000G Operating Instructions Manual page 174

Playback from button operations and operation icons
Playback operation
Playback/pause
Fast-reverse playback
Fast-forward playback
Stop (return to thumbnail screen)
Skip playback
(cue up of the clip)
Slow playback
Frame-by-frame playback
Direct playback
@
NOTE
t Operations of the camera or some performance may become slow for the clip with large file size.
t Operations of the camera or some performance may become slow when there are large number of clips on the memory card.
t Playback will stop once by switching the card slot when MOV is selected as the recording file format, and the [THUMBNAIL] menu → [PLAYBACK] →
[CLIP SEL] → [ALL SLOT]/[SAME FORMAT] is set, and the clips of all the memory cards are displayed. Playback is not possible across two memory
cards.
t If selecting P2 as recording file format and playing back a clip that was recorded by relay recording and spans between two memory card, playback
will pause and a black screen will be displayed when switching the card slot. Playback will automatically restart after the switch.
t Playback stops when the memory card is removed during playback.
Chapter 6 Playback — Thumbnail operation
A001C001
TCR 12:59:59:23
Touch [=/&] or press the <PLAY/PAUSE (=/&)> button.
Touch [%] or press the <REV (%)> button. Touch twice to increase the speed.
Touch [)] or press the <FWD ())> button. Touch twice to increase the speed.
Touch [(] or press the <STOP (()> button.
Touch the LCD monitor while playing back, and slide from right to left (left to right).
When sliding from left to right, the clip skips to the beginning of the previous clip if the current playback
position of the clip is at less than three seconds from the beginning. The clip skips to the beginning of the
current clip if the current playback position of the clip is at three seconds or more from the beginning.
Skip playback is also possible by pressing the <FWD ())> button or <REV (%)> button while paused.
Touch and hold [&=] during pause.
Touch and hold [~&] for reverse slow playback.
It will perform slow playback with continuous frame-by-frame while [&=] is touched.
f Touch [=/&] or press the <PLAY/PAUSE (=/&)> button to return to normal playback.
f The frame-by-frame interval and the display time for each frame for the reverse slow playback differ
depending on the type of the clip.
Touch [&=] during pause.
([~&] is for reverse frame-by-frame playback)
f Touch [=/&] or press the <PLAY/PAUSE (=/&)> button to return to normal playback.
f The frame-by-frame interval for reverse frame-by-frame playback differs depending on the type of the
clip.
Touch the direct playback bar, or slide it while touching.
f The playback video is paused during the operation. Playback is started by releasing the finger.
Direct playback bar
Operating procedure
– 174 –