Panasonic AJ-CX4000G Operating Instructions Manual page 144

16 Connection status of the wireless LAN/wired LAN
Displays the connection status of the wireless LAN or wired LAN.
f : Set to wireless LAN and not connected to the ROP app.
f : Set to wireless LAN and connected to the ROP app.
f : Set to wireless LAN but the wireless LAN is not operating properly.
f : Set to wired LAN and not connected to the ROP app.
f : Set to wired LAN and connected to the ROP app.
f : Set to wired LAN but the wired LAN is not operating properly.
f (No display): Both the wireless LAN and the wired LAN are disabled.
17 Remaining battery level
f [**.*V]: Displays the charge level of batteries with no charge level information in 0.1 V units. The display will flash when the remaining charge is
at the near end setting value or below.
f [***%]: Displays the charge level of batteries with charge level information in %. The display will flash when the remaining charge is at the near
end setting value or below.
f [EMP]: Displayed when there is no charge level on batteries with charge level information or the level is at the near end setting value or below.
f [MAX]: Displayed when batteries with charge level information are fully charged.
18 Chromatic aberration compensation function
f [CAC]: Chromatic aberration compensation function is enabled.
19 Gamma mode
Setting value for the gamma mode selected in the [SCENE FILE] menu → [GAMMA MODE SEL] is displayed.
f [HD]
f [SD]
f [FLK1]
f [FLK2]
f [FLK3]
f [FREC]
f [VREC]
f [HLG]
20 Scene file name
Name of the scene file selected in the [SCENE FILE] menu → [FILE SELECT] is displayed.
21 Waveform monitor
Displays the video status in waveform or vector.
Displayed only on the LCD monitor and the viewfinder.
22 Type of marker
Displays the type of currently displayed marker in the STATUS screen of the mode check.
[MKR:A]: Displays the marker type [A].
[MKR:B]: Displays the marker type [B].
[MKR:OFF]: Marker is not displayed.
23 Digital zoom
Displays the digital zoom ratio.
f [D2×]: Two times
f [D3×]: Three times
f [D4×]: Four times
24 Focus
Displays the focus value.
The display of the focus value follows the setting in the [VIDEO OUT/LCD/VF] menu → [INDICATOR] → [ZOOM/FOCUS].
f [MF**]: Displays in the position value from [00] to [99] when set to the [VIDEO OUT/LCD/VF] menu → [INDICATOR] → [ZOOM/FOCUS] →
[NUMBER].
f [MF****ft]: Displays in feet unit when set to the [VIDEO OUT/LCD/VF] menu → [INDICATOR] → [ZOOM/FOCUS] → [mm/feet].
f [MF****m]: Displays in meter unit when set to the [VIDEO OUT/LCD/VF] menu → [INDICATOR] → [ZOOM/FOCUS] → [mm/m].
f (No display): Focus value cannot be acquired.
25 Zoom
Displays the zoom value.
The display of the zoom value follows the setting in the [VIDEO OUT/LCD/VF] menu → [INDICATOR] → [ZOOM/FOCUS].
f [Z***]: Displays in the position value from [000] to [999] when set to the [VIDEO OUT/LCD/VF] menu → [INDICATOR] → [ZOOM/FOCUS] →
[NUMBER].
f [Z**.*]: Displays in millimeter unit when set to the [VIDEO OUT/LCD/VF] menu → [INDICATOR] → [ZOOM/FOCUS] → [mm/feet] or [mm/m].
f (No display): Zoom value cannot be acquired.
26 Super black
f [B]: Displayed when the super black function is enabled.
27 Iris
Displays the F value.
Displayed when a lens with an F value display function is used.
Flashes when changing the setting value of the iris override function.
f [F***]: Displays the F value of the lens.
f [OPEN]: Displayed when the lens aperture is open.
f [CLOSE]: Displayed when the lens aperture is closed.
Chapter 5 Shooting — Display of the viewfinder status
– 144 –