Menu Settings - Panasonic AJ-CX4000G Operating Instructions Manual

[1]
[2]
[3]
[MATRIX TABLE]
Selects the color correction table when the <GAIN> switch is set to <M>.
The items that can be set are as follows.
f [A], [B], [OFF]
[COLOR CORRECT]
Enables/disables the [COLOR CORRECTION] function when the <GAIN> switch is set to <M>.
The items that can be set are as follows.
f [ON], [OFF]
[HIGH SETTING]
[MASTER GAIN]
Sets the gain value to be assigned to <H> of the <GAIN> switch.
f [−6dB]...[30dB]
[H.DTL LEVEL]
Sets the intensity of the detail level in the horizontal direction.
The items that can be set are as follows.
f [−7]...[7]
[V.DTL LEVEL]
Sets the intensity of the detail level in the vertical direction.
The items that can be set are as follows.
f [−7]...[7]
[DTL CORING]
Sets the level of signal (including noise) that does not activate the detail effect.
The items that can be set are as follows.
f [0]...[60]
[DTL FREQ.]
Sets the thickness of the detail.
The items that can be set are as follows.
f [−7]...[7]
[LEVEL DEPEND.]
When the detail of luminosity signal is emphasized, details in the darker areas are compressed.
Details of bright areas are compressed more when the value set for [LEVEL DEPEND.] is larger.
The items that can be set are as follows.
f [−7]...[7]
[MASTER GAMMA]
Performs the setting of the master gamma in 0.01 steps.
The items that can be set are as follows.
f [0.30] ... [0.75] (0.01 steps)
[BLACK GAMMA]
Sets the gamma curves of dark areas.
[−8]...[−1]
[OFF]
[1]...[8]
[B.GAMMA RANGE]
Sets the maximum level of compression/expansion.
[1]
[2]
[3]
[MATRIX TABLE]
Selects the color correction table when the <GAIN> switch is set to <H>.
The items that can be set are as follows.
f [A], [B], [OFF]
Chapter 4 Operation — Menu settings
Around 20%
Around 30%
Around 40%
Compresses the dark area.
Standard state
Expands dark areas.
Around 20%
Around 30%
Around 40%
– 78 –