Setting High Dynamic Range (Hdr); Recording In High Dynamic Range (Hdr); Playing Back The Signal Recorded In High Dynamic Range (Hdr) - Panasonic AJ-CX4000G Operating Instructions Manual

Setting high dynamic range (HDR)

Recording in high dynamic range (HDR)

1
Select the [SCENE FILE] menu → [GAMMA MODE SEL] → [HLG].
The output will be as follows.
<SDI OUT1> terminal: Outputs in high dynamic range (HDR) or standard dynamic range (SDR) according to the setting of the [VIDEO OUT/LCD/
VF] menu → [SDI OUT1] → [SDI OUT HDR].
<SDI OUT2> terminal: Outputs in high dynamic range (HDR) or standard dynamic range (SDR) according to the setting of the [VIDEO OUT/LCD/
VF] menu → [SDI OUT2] → [SDI OUT HDR].
<HDMI> terminal: When set to the [VIDEO OUT/LCD/VF] menu → [HDMI OUT] → [SIGNAL SEL] → [SDI OUT1(2160p)], outputs according to
the setting of the [VIDEO OUT/LCD/VF] menu → [SDI OUT1] → [SDI OUT HDR]. When set to [SDI OUT2], outputs according to the setting of the
[VIDEO OUT/LCD/VF] menu → [SDI OUT2] → [SDI OUT HDR].
Viewfinder, LCD monitor: Outputs according to the setting of the [VIDEO OUT/LCD/VF] menu → [LCD/VF HDR]. HDR or SDR can be selected
when recording in HDR.

Playing back the signal recorded in high dynamic range (HDR)

When set to the [SCENE FILE] menu → [GAMMA MODE SEL] → [HLG], detects the recorded information and sets as follows.
r When recorded information is in high dynamic range
<SDI OUT1> terminal: Outputs in high dynamic range (HDR) or standard dynamic range (SDR) according to the setting of the [VIDEO OUT/LCD/VF]
menu → [SDI OUT1] → [SDI OUT HDR].
<SDI OUT2> terminal: Outputs in high dynamic range (HDR) or standard dynamic range (SDR) according to the setting of the [VIDEO OUT/LCD/VF]
menu → [SDI OUT2] → [SDI OUT HDR].
<HDMI> terminal: When set to the [VIDEO OUT/LCD/VF] menu → [HDMI OUT] → [SIGNAL SEL] → [SDI OUT1(2160p)], outputs according to the
setting of the [VIDEO OUT/LCD/VF] menu → [SDI OUT1] → [SDI OUT HDR]. When set to [SDI OUT2], outputs according to the setting of the [VIDEO
OUT/LCD/VF] menu → [SDI OUT2] → [SDI OUT HDR].
Viewfinder, LCD monitor: Outputs according to the setting of the [VIDEO OUT/LCD/VF] menu → [LCD/VF HDR]. HDR or SDR can be selected when
recording in HDR.
r When recorded information is not in high dynamic range or there is no recorded information
<SDI OUT1>/<SDI OUT2>/<HDMI> terminal, view finder, LCD monitor: Outputs the recorded video as is.
Following settings will be disabled: the [VIDEO OUT/LCD/VF] menu → [SDI OUT1]/[SDI OUT2] → [SDI OUT HDR], the [VIDEO OUT/LCD/VF] menu →
[LCD/VF HDR].
@
NOTE
t For clips recorded with high dynamic range (hybrid log gamma), [HLG] is displayed for [GAMMA] item in detailed information about the clip displayed
in the [THUMBNAIL] menu → [CLIP] → [INFORMATION].
t Recorded video will be output as is regardless of recorded information when anything other than the [SCENE FILE] menu → [GAMMA MODE SEL] →
[HLG] is selected.
Chapter 5 Shooting — Setting high dynamic range (HDR)
– 128 –