Panasonic AJ-CX4000G Operating Instructions Manual page 87

The items that can be set are as follows.
f [−1], [0], [1], [2]
(Factory setting: [0])
[SELF SHOOT]
Sets the display of the LCD monitor when mirror shooting is performed.
[NORMAL]
[MIRROR]
(Factory setting: [MIRROR])
[LCD/VF HDR]
Sets the output image from the LCD monitor and viewfinder.
[SDR]
[HDR]
(Factory setting: [HDR])
@
NOTE
t When the [SCENE FILE] menu → [GAMMA MODE SEL] is set to anything other than [HLG], the camera image is output in the standard dynamic
range.
[INDICATOR]
Selects the indicator to display in the output image.
[INDICATOR SW]
Selects the status display method.
[ON]
[OFF]
(Factory setting: [ON])
[TC]
Displays/hides the time code, user bits, and counter.
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [OFF])
[TC ON COLOR BAR]
Selects whether to display the time code, user bits, and counter when color bar is output.
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [OFF])
[REC STATUS]
Sets whether to display [REC] during recording.
[ON]
[OFF]
(Factory setting: [OFF])
[REC MEDIA]
Displays/hides the setting status of the memory card format to record.
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [ON])
[SLOT STATUS]
Displays/hides the status of the card slot and remaining memory card capacity.
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [ON])
[2 SLOTS FUNC.]
Displays/hides the setting in the [RECORDING] menu → [2 SLOTS FUNC.].
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [ON])
Chapter 4 Operation — Menu settings
Does not invert the left and right sides.
Inverts the left and right sides.
Outputs in the standard dynamic range.
Outputs in the high dynamic range.
Status is displayed constantly.
Normally, status is not displayed. This is displayed when the mode check screen is displayed by pressing the <MARKER
SEL>/<MODE CHECK> switch toward the <MCK> side.
[REC] is displayed.
[REC] is not displayed.
However, [REC] is displayed when set to the [OTHERS] menu → [LED] → [REC TALLY] → [CHAR].
– 87 –