Panasonic AJ-CX4000G Operating Instructions Manual page 146

F is displayed when the <AUDIO IN CH3>/<AUDIO IN CH4> switch is set to <FRONT>. W is displayed when the <AUDIO IN CH3>/<AUDIO IN
CH4> switch is set to <W.L.>. R is displayed when the <AUDIO IN CH3>/<AUDIO IN CH4> switch is set to <REAR>.
A white frame is displayed at the position of the reference level set in the [AUDIO] menu → [REC CH SETTINGS] → [HEAD ROOM]. (Eighth from
the left when set to [20dB], ninth from the left when set to [18dB])
f : Displayed when audio cannot be recorded.
40 Filter position
Displays the <ND FILTER> dial position with numbers 1 to 4 and <CC FILTER> dial position with alphabet A to D.
[-] will flash by inverting black and white when the filter position is not set correctly.
41 Extender
f [EX]: Displayed when the lens extender function is functioning.
42 Remote control status in an IP connection
f [IP REMOTE]: Displayed when the remote control is possible in the IP connection.
f [IP REMOTE] (flashing): Displayed when waiting for the connection in the IP connection.
f (No display): Remote control function in an IP connection is disabled.
43 Error display of auto black balance
Displays the status when the adjustment result of the auto black balance was abnormal.
44 Error display of auto white balance
Displays the status when the adjustment result of the auto white balance was abnormal.
45 Message display area
Displayed when there is a message or warning about the camera status.
46 Message for invalid filter position
Message is displayed when power is turned on if the <ND FILTER>/<CC FILTER> dial is not set correctly.
Message is displayed when performing the auto white balance if the <CC FILTER> dial is not set correctly.
47 Clip name
Displays the name of the clip being recorded with up to eight characters from the start.
48 Recording format
Displays the file format set in the [SYSTEM] menu → [FILE FORMAT] and the recording codec set in the [SYSTEM] menu → [REC FORMAT].
It is not displayed when set to the [NETWORK] menu → [NETWORK FUNC] → [NDI|HX].
f [P2 AVC-I422]
f [P2 AVC-G50]
f [P2 AVC-G25]
f [P2 AVC-G12]
f [MOV 420 150M]
f [MOV 420 100M]
f [MOV 422 150M]
f [MOV 422 100M]
f [MOV 422 50M]
f [MOV HEVC 200M]
f [MOV HEVC 150M]
f [MOV HEVC 100M]
f [MOV ALL-I 400M]
f [MOV ALL-I 200M]
f [MOV ALL-I 100M]
49 System resolution/system frequency
Displays the system resolution and the system frequency set in the [SYSTEM] menu → [REC FORMAT].
f [2160-59.94p]
f [2160-50.00p]
f [2160-29.97p]
f [2160-25.00p]
f [2160-23.98p]
f [1080-59.94p]
f [1080-50.00p]
f [1080-29.97p]
f [1080-25.00p]
f [1080-23.98p]
f [1080-59.94i]
f [1080-50.00i]
f [720-59.94p]
f [720-50.00p]
Chapter 5 Shooting — Display of the viewfinder status
– 146 –