Menu Settings - Panasonic AJ-CX4000G Operating Instructions Manual

[SKIN TONE DTL C]
Selects the skin tone table that will display the skin tone detail.
Create the skin tone table with [DETECT TABLE]. You can shoot smoother skin tones by displaying the skin tone detail.
You can use only [SKIN TONE DTL C] or use a combination of [SKIN TONE DTL C] and [SKIN TONE DTL A] or a combination of [SKIN TONE DTL C]
and [SKIN TONE DTL B].
The items that can be set are as follows.
f [ON], [OFF]
[SKIN TONE ZEBRA]
Set to display a zebra pattern in the skin tone area displayed in the viewfinder screen.
The zebra pattern is displayed when this item is set to [ON] and [SKIN TONE DTL A]/[SKIN TONE DTL B]/[SKIN TONE DTL C] is enabled.
The zebra pattern displays the area selected in [SKIN TONE DTL SETTING].
The items that can be set are as follows.
f [ON], [OFF]
[SKIN TONE DTL SETTING]
[DETECT TABLE]
Selects the skin tone table of the subject to set the skin tone detail.
The items that can be set are as follows.
f [A], [B], [C]
[SKIN DTL EFFECT]
Sets the effective level of the skin tone detail.
The items that can be set are as follows.
f [0]...[31]
[I CENTER]
Sets the center position of the upper I axis (setting the area that applies the skin tone).
The items that can be set are as follows.
f [0]...[255]
[I WIDTH]
Sets the width of the area that displays the skin tone of the upper I axis that focus on [I CENTER].
The items that can be set are as follows.
f [1]...[3]
[Q WIDTH]
Sets the width of the area that displays the skin tone of the upper Q axis that focus on [I CENTER].
The items that can be set are as follows.
f [1]...[3]
[Q PHASE]
Sets the phase of the area that applies the skin tone related to the Q axis.
The items that can be set are as follows.
f [−128]...[127]
[RB GAIN CONTROL SETTING]
[R GAIN AWB PRE]
Sets the Rch gain when the <WHITE BAL> switch is set to <PRST>.
The items that can be set are as follows.
f [−200]...[200]
[B GAIN AWB PRE]
Sets the Bch gain when the <WHITE BAL> switch is set to <PRST>.
The items that can be set are as follows.
f [−200]...[200]
[R GAIN AWB A]
Sets the Rch gain when the <WHITE BAL> switch is set to <A>.
The items that can be set are as follows.
f [−200]...[200]
[B GAIN AWB A]
Sets the Bch gain when the <WHITE BAL> switch is set to <A>.
The items that can be set are as follows.
f [−200]...[200]
Chapter 4 Operation — Menu settings
– 70 –