Menu Settings - Panasonic AJ-CX4000G Operating Instructions Manual

(Factory setting: [30])
[A.IRIS WINDOW]
Selects the auto iris detection window.
[NORMAL1]
[NORMAL2]
[CENTER]
(Factory setting: [NORMAL1])
[S.IRIS LEVEL]
Sets the super iris (backlight compensation) target value.
The items that can be set are as follows.
f [0]...[100]
(Factory setting: [70])
[IRIS GAIN]
Sets whether to perform the [IRIS GAIN] adjustment on the camera or on the lens.
The items that can be set are as follows.
f [CAM], [LENS]
(Factory setting: [LENS])
[IRIS GAIN VALUE]
Selects the [IRIS GAIN] adjustment value.
This setting is enabled when [IRIS GAIN] is set to [CAM].
The items that can be set are as follows.
f [0]...[20]
(Factory setting: [10])
[LENS ADJ.]
[F2.8 ADJ.]
Iris is set to F2.8 only when set to [ON].
(Adjusts the iris so that it becomes F2.8 at the lens side)
When moved from the [F2.8 ADJ.] setting screen, it is forcefully switched to [OFF].
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [OFF])
[F16 ADJ.]
Iris is set to F16 only when set to [ON].
(Adjusts the iris so that it becomes F16 at the lens side)
When moved from the [F16 ADJ.] setting screen, it is forcefully switched to [OFF].
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [OFF])
[LENS FILE ADJ.]
@
NOTE
t Data adjusted with [LENS FILE ADJ.] can be saved as a lens file to the SD card.
[LENS FILE ADJ. MODE]
Selects the mode to adjust the lens.
When transferred from the [LENS FILE ADJ. MODE] setting screen, it is forcefully switched to [OFF].
[ON]
[OFF]
(Factory setting: [OFF])
[LENS R GAIN OFFSET]
Corrects the Rch sensitivity of the lens to use.
The items that can be set are as follows.
f [−200]...[200]
(Factory setting: [0])
[LENS B GAIN OFFSET]
Corrects the Bch sensitivity of the lens to use.
Chapter 4 Operation — Menu settings
Window that is around center of the screen.
Window that is around bottom of the screen.
Window that is a spot around center of the screen.
The gains of Rch and Bch adjusted in the [SCENE FILE] menu → [RB GAIN CONTROL SETTING] and the flare level of
Rch, Gch, and Bch adjusted in the [SCENE FILE] menu → [RGB BLACK CONTROL SETTING] are disabled.
The gains of Rch and Bch adjusted in the [SCENE FILE] menu → [RB GAIN CONTROL SETTING] and the flare level of
Rch, Gch, and Bch adjusted in the [SCENE FILE] menu → [RGB BLACK CONTROL SETTING] are enabled.
– 66 –