Panasonic AJ-CX4000G Operating Instructions Manual page 28

Chapter 2 Description of Parts — Shooting and recording/playback functions section
14 <SDI OUT1> terminal
This is the output terminal only for SDI.
Select an output signal in the [VIDEO OUT/LCD/VF] menu → [SDI OUT1] → [OUT FORMAT].
Superimposing of characters is set in the [VIDEO OUT/LCD/VF] menu → [SDI OUT1] → [SDI OUT CHAR].
15 <SDI OUT2> terminal
This is the video output terminal for the monitor.
Select an output signal in the [VIDEO OUT/LCD/VF] menu → [SDI OUT2] → [OUT FORMAT].
Superimposing of characters can be set with the <SDI OUT 2 CHARACTER> switch independently of the <SDI OUT1> terminal.
@
NOTE
t Use 5C-FB or higher cable to connect to the <SDI OUT1>/<SDI OUT2> terminals.
– 28 –