Menu Settings - Panasonic AJ-CX4000G Operating Instructions Manual

[SHUTTER SPEED]
The items that can be set in [POSITION1] to [POSITION6] are as follows.
f When the [SYSTEM] menu → [FREQUENCY] → [59.94Hz] is set
- [OFF], [1/100], [1/120], [1/250], [1/500], [1/1000], [1/2000], [HALF]
f When the [SYSTEM] menu → [FREQUENCY] → [50.00Hz] is set
- [OFF], [1/60], [1/120], [1/250], [1/500], [1/1000], [1/2000], [HALF]
[SYNCHRO SCAN]
[POSITION1]
[POSITION2]
[POSITION3]
[POSITION4]
[POSITION5]
[POSITION6]
[SW MODE]
[RET SW]
Sets the function when the <RET> button on the lens is pressed.
[INHIBIT]
[D.ZOOM]
[FOCUS ASSIST]
[REC CHECK]
[LCD/VF DETAIL]
[VF COLOR]
[STREAMING START]
(Factory setting: [REC CHECK])
[S.BLK LEVEL]
Sets the super black level.
The items that can be set are as follows.
f [−30], [−20], [−10]
(Factory setting: [−10])
[AUTO KNEE SW]
Enables/disables the auto knee function and the dynamic range stretcher function.
[DRS]
[ON]
[OFF]
(Factory setting: [ON])
[SHD,ABB SW CTL]
Sets whether to automatically adjust black shading when the <AUTO W/B BAL> switch is pressed toward <ABB> side for two seconds or more.
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [OFF])
[S.GAIN OFF]
Selects a method to release super gain mode.
[L/M/H]
[S.GAIN]
Chapter 4 Operation — Menu settings
[SYNCHRO SCAN] is assigned as the shutter speed selected by the <SHUTTER> switch.
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [ON])
Sets the shutter speed of [POSITION1].
f The factory setting varies depending on the [SYSTEM] menu → [FREQUENCY] setting.
(Factory setting: [1/100] (when [59.94Hz] is set), [1/60] (when [50.00Hz] is set))
Sets the shutter speed of [POSITION2].
(Factory setting: [1/120])
Sets the shutter speed of [POSITION3].
(Factory setting: [1/250])
Sets the shutter speed of [POSITION4].
(Factory setting: [1/500])
Sets the shutter speed of [POSITION5].
(Factory setting: [1/1000])
Sets the shutter speed of [POSITION6].
(Factory setting: [1/2000])
Does not assign a function.
Assigns the digital zoom function. Zooms in on the field angle by 2x, 3x and 4x vertically and horizontally.
Displays/hides the focus assist display.
Select the type of display in the [VIDEO OUT/LCD/VF] menu → [FOCUS ASSIST] → [FOCUS ASSIST SELECT].
Automatically plays back the last approximately three seconds of the previously shot clip.
Emphasizes the contour of the image in the viewfinder or LCD monitor to make it easier to focus.
Selects whether to display viewfinder images in color or in black and white.
This is interlocked with the setting value in the [VIDEO OUT/LCD/VF] menu → [VF COLOR].
Assigns the function for starting or stopping streaming from the camera.
This is interlocked with the setting value in the [NETWORK] menu → [STREAMING] → [START].
The dynamic range stretcher function is enabled when the <OUTPUT>/<AUTO KNEE> switch is set to <ON>.
The auto knee function is enabled when the <OUTPUT>/<AUTO KNEE> switch is set to <ON>.
The auto knee function and the dynamic range stretcher function are not enabled even if the <OUTPUT>/<AUTO KNEE>
switch is set to <ON>.
The super gain mode is released in following cases.
f When the <GAIN> switch setting is changed
f When the USER button assigned with [S.GAIN] is pressed
The super gain mode is released only when the USER button assigned with [S.GAIN] is pressed.
– 63 –