Menu Settings - Panasonic AJ-CX4000G Operating Instructions Manual

[Yl-R-R] ([SAT])
[Yl-R-R] ([PHASE])
[MASTER PED]
Sets the master pedestal.
The items that can be set are as follows.
f [−200]...[200]
[RGB BLACK CONTROL SETTING]
[R PED]
Sets the Rch pedestal level.
The items that can be set are as follows.
f [−100]...[100]
[G PED]
Sets the Gch pedestal level.
The items that can be set are as follows.
f [−100]...[100]
[B PED]
Sets the Bch pedestal level.
The items that can be set are as follows.
f [−100]...[100]
[PEDESTAL OFFSET]
Sets the Rch, Gch, and Bch pedestal levels after adjusting the automatic black balance.
[ON]
[OFF]
[R FLARE]
Adjusts the Rch flare level.
The adjusted value of this item is added to the flare adjustment value adjusted in the [CAMERA] menu → [LENS FILE ADJ.].
The items that can be set are as follows.
f [−100]...[100]
[G FLARE]
Adjusts the Gch flare level.
The adjusted value of this item is added to the flare adjustment value adjusted in the [CAMERA] menu → [LENS FILE ADJ.].
The items that can be set are as follows.
f [−100]...[100]
[B FLARE]
Adjusts the Bch flare level.
The adjusted value of this item is added to the flare adjustment value adjusted in the [CAMERA] menu → [LENS FILE ADJ.].
The items that can be set are as follows.
f [−100]...[100]
[GAMMA MODE SEL]
Selects the gamma mode.
[HD]
[SD]
[FILMLIKE1]
[FILMLIKE2]
[FILMLIKE3]
[FILM-REC]
[VIDEO-REC]
[HLG]
[GAMMA SETTING]
[MASTER GAMMA]
Sets the master gamma in 0.01 steps.
f Depending on the <GAIN> switch setting, it is linked to the setting value of [MASTER GAMMA] in [LOW SETTING]/[MID SETTING]/[HIGH SETTING].
The items that can be set are as follows.
f [0.30]...[0.75]
Chapter 4 Operation — Menu settings
Corrects the color saturation between "colors between yellow and red" and red.
Corrects the hue between "colors between yellow and red" and red.
Keeps each of the values set in [R PED], [G PED], and [B PED].
Sets the pedestal level of Rch, Gch, and Bch to [0].
Sets the gamma characteristics for HD (High Definition).
Increases gain in darker areas more than HD gamma.
Sets the characteristics that reproduce more highlight areas compared to HD gamma.
Sets the characteristics that reproduce more highlight areas compared to [FILMLIKE1].
Sets the characteristics that reproduce more highlight areas compared to [FILMLIKE2].
Sets the cine gamma characteristics for film.
Sets the cine gamma characteristics for video.
Sets the hybrid log gamma (HLG) characteristics.
– 74 –