Table of Contents
Advertisement
Display of the viewfinder status
In addition to video, the viewfinder displays messages that indicate the camera settings and operation status, a center marker, safety zone marker,
zebra patterns, and other information.
Lamp display in the viewfinder
The example is for the AJ-CVF50G. (For information on the viewfinder, refer to the Operating Instructions for the optional viewfinder.)
1 Green tally lamp
Lights up green if a green tally signal is received from the Camera Control Unit.
2 TALLY/REC (recording) lamp
Illuminated in red during recording, and flashes if an abnormality occurs.
For details, refer to "Warning system" (page 203).
3 [!] lamp
[!] lamp of the viewfinder illuminates when the items set to [ON] in the [VIDEO OUT/LCD/VF] menu → [!LED] are enabled.
4 BATT (battery) lamp
Starts flashing few minutes before the battery voltage drops and the battery charge runs out.
It is illuminated after the battery is completely flat.
To prevent operation from being interrupted, replace the battery before it is nearly flat.
For details, refer to "Warning system" (page 203).
5 SAVE lamp
The lamp is always out.
Configuration of status display on viewfinder screen
The screen displayed in normal status is displayed as shown below.
Selecting display items on viewfinder screen
The items to display in the output image can be selected.
For details on each items, refer to [INDICATOR] (page 87).
1
Set display of each item in the [VIDEO OUT/LCD/VF] menu → [INDICATOR].
Chapter 5 Shooting — Display of the viewfinder status
1
eP2
TCG 1 2 : 3 4 : 5 6 : 2 8
R E C
2160-59.94p
B . D E V
MOV 420 150M
A001C001
IP REMOTE
EX
AUTO KNEE:ON
1A
ATW
DEC 3 1 2 0 1 9 1 0 : 4 5 : 3 0
CH1
36dB +12↑
1:F 2:W
CH2
2
3
5
999min
999min
RELAY
INTRVL
REC
S/H
LOW LIGHT
65%
H.SENS.
1/10000
+
– 141 –
14.6V
FBC
HDR
CAC
HD
MKR:A
D2x
S
B
MF00
F5.6
Z000
- Quick Links:
- Before Using the Camera
Hide quick links:
Advertisement
Table of Contents
