Connecting With A Recording Device Or A Monitor - Panasonic AJ-CX4000G Operating Instructions Manual

Chapter 8 Connecting to External Devices — Connecting with a recording device or a monitor

Connecting with a recording device or a monitor

The camera directly controls the video and the monitor to output video.
@
NOTE
t VIERA Link is not supported on the camera. The VIERA Link of other device may not properly operate when connected to the VIERA Link compatible
device with a HDMI cable (optional).
t The SD resolution signal output from the <HDMI> terminal is output as a progressive signal (480P, 576P).
t Use a double-shielded cable equivalent to 5C-FB for the BNC cable (optional) that is connected to the <SDI OUT1> terminal or the <SDI OUT2>
terminal.
t Use the double-shielded cable supporting 4K/60p as the HDMI cable. Also, it is recommended to use the Panasonic HDMI cable supporting 4K/60p as
the HDMI cable.
Audio pin cable
HDMI cable
BNC cable (SDI)
– 183 –
Video equipment/monitor