Shooting And Recording/Playback Functions Section - Panasonic aj-HPX2000p Operating Instructions Manual

Shooting and Recording/Playback Functions Section

24
1
2
3
11
4
1.
CC/ND FILTER (filter selector) control
Used to select a filter appropriate for illumination and
color temperature of the subject.
When the menu option DISP MODE is set to "3",
switching this control displays the selected filter
number in the viewfinder.
Examples of filter selection according to shooting conditions
Setting of the
Description of
CC/ND FILTER
control
1 3200K
2 5600K + 1/8
3 5600K
4 5600K + 1/64
2.
USER MAIN, USER 1 and USER 2 buttons
These buttons can
functions, using a menu option. Each button, when
pressed, performs the assigned function.
For more information, see [ Assigning Functions to
USER MAIN, USER1 and USER2 Buttons ] (page 44).
16
Parts and their Functions ： Shooting and Recording/Playback Functions Section
10 9 8
16 19
14 6 13
12
5 7
Shooting
filter conditions
Sunrise, sunset
Studio
Clear outdoor
environments
Cloudy/rainy outdoor
environments
Clear, bright scenes
such as snowscape,
high mountains,
beaches, etc.
be assigned user-selected
34
21 22 23
20
36
35
15
17
33
32 18
3.
SHUTTER switch
Used to enable or disable the electronic shutter.
OFF: Electronic shutter disabled.
ON: Electronic shutter enabled.
SEL: Used to change the speed of the electronic
shutter.
This dial switch returns to its original position. Each
turn of the switch alters the shutter speed.
For more information, see [ Setting the Electronic
Shutter ] (page 42).
4.
AUTO W/B (white/black) BAL switch
AWB: White balance is automatically adjusted.
When the WHITE BAL switch on the side is
positioned at [A] or [B], the adjusted value is
stored in the memory.
Note that when the switch is positioned at
PRST this function does not work.
ABB: Back balance is automatically adjusted.
To automatically correct black shading, the
AUTO W/B BAL switch must be pressed
toward [ABB] for longer than 8 seconds.
Note
To stop automatic adjustment of the white or black
balance in progress, set the switch to either ([AWB] or
[ABB]).
If automatic adjustment is cancelled, the value in effect
before automatic adjustment will be used.
25
26
27
28
29
31 30