Setting Time Code - Panasonic AJ-CX4000G Operating Instructions Manual

4
Set the <TCG> switch to <F-RUN> or <R-RUN>.
5
Set to the [RECORDING] menu → [TC/UB] → [UB MODE] → [USER].
@
NOTE
t Thumbnail operations and menu operations on thumbnail operation section are not possible while the <TCG> switch is set to <SET>.
Frame rate information recorded on user bits
Recording the frame rate values for the image information shot/recorded according to the frame rate set in the [SYSTEM] menu → [REC FORMAT] to
user bits allows you to use on the editor (personal computer editing software).
Frame rate information
The relationship between frame rate, image pull-down, time code, and user bits is as follows.
Verification information on the right-hand six digits
r Camera video mode
The display of the camera video mode differs depending on the setting of following menus.
[FREQUENCY]
[59.94Hz]
[50.00Hz]

Setting time code

1
Set the <DISPLAY> switch to <TC>.
2
Set the <TCG> switch to <SET>.
3
Set to the [RECORDING] menu → [TC/UB] → [DF/NDF].
f Set [DF] to advance the time code in the drop frame mode, and set [NDF] to advance it in the non-drop frame mode. However, note that the time
code runs by [NDF] at all times in the 23.98p mode.
4
Set the time code by the cursor operation buttons.
f Screen display
- I: The digit to be set (flashing) moves to the right.
- Y: The digit to be set (flashing) moves to the left.
- `: The value of the digit to set (flashing) is incremented by one.
- {: The value to set (flashing) is decremented by one.
5
Switch by the <TCG> switch.
To advance the time code by free run, switch to <F-RUN>, and to advance by recording run, switch to <R-RUN>.
r Setting range of time code
The range of the time code that can be set differs depending on the recording frame frequency of [REC FORMAT].
[FREQUENCY]
[59.94Hz]
[50.00Hz]
@
NOTE
t Set the number of frames with a value that is a multiple of four when the recording frame frequency of [REC FORMAT] is set to 23.98p. The time code
to record will shift with any other value.
t Thumbnail operations and menu operations on thumbnail operation section are not possible while the <TCG> switch is set to <SET>.
Chapter 5 Shooting — Setting of time data
Recording frame frequency of [REC
FORMAT]
23.98p
29.97p
59.94p
59.94i
25.00p
50.00p
50.00i
Recording frame frequency of [REC
FORMAT]
59.94p, 29.97p, 59.94i
23.98p
50.00p, 25.00p, 50.00i
Fixed values
Frame rate
Camera video mode
Display of frame rate
024
030
060
060
025
050
050
Range of the time code that can be set
00:00:00:00 - 23:59:59:29
00:00:00:00 - 23:59:59:23
00:00:00:00 - 23:59:59:24
– 139 –
REC mark
Display of camera video mode
C
8
8
0
A
A
2