Menu Settings - Panasonic AJ-CX4000G Operating Instructions Manual

[HLG KNEE SW]
Enables/disables the operation of knee for HLG.
The items that can be set are as follows.
f [ON], [OFF]
[HLG KNEE POINT]
Sets the position of the knee point for HLG.
The items that can be set are as follows.
f [55]...[100]
[HLG KNEE SLOPE]
Sets the inclination of knee for HLG.
The items that can be set are as follows.
f [0]...[100]
[HI-COLOR SW]
Selects [ON]/[OFF] of the mode that expands the color dynamic range.
The items that can be set are as follows.
f [ON], [OFF]
[WHITE CLIP SETTING]
[WHITE CLIP]
Turns the white clip function [ON]/[OFF]. The setting value of [WHITE CLIP LEVEL] is enabled when the function is [ON].
The items that can be set are as follows.
f [ON], [OFF]
[WHITE CLIP LEVEL]
Sets the white clip level.
The items that can be set are as follows.
f [90%]...[109%]
[LOW SETTING]
[MASTER GAIN]
Sets the gain value to be assigned to <L> of the <GAIN> switch.
f [−6dB]...[30dB]
[H.DTL LEVEL]
Sets the intensity of the detail level in the horizontal direction.
The items that can be set are as follows.
f [−7]...[7]
[V.DTL LEVEL]
Sets the intensity of the detail level in the vertical direction.
The items that can be set are as follows.
f [−7]...[7]
[DTL CORING]
Sets the level of signal (including noise) that does not activate the detail effect.
The items that can be set are as follows.
f [0]...[60]
[DTL FREQ.]
Sets the thickness of the detail.
The items that can be set are as follows.
f [−7]...[7]
[LEVEL DEPEND.]
When the detail of luminosity signal is emphasized, details in the darker areas are compressed.
Details of bright areas are compressed more when the value set for [LEVEL DEPEND.] is larger.
The items that can be set are as follows.
f [−7]...[7]
[MASTER GAMMA]
Performs the setting of the master gamma in 0.01 steps.
The items that can be set are as follows.
f [0.30] ... [0.75] (0.01 steps)
Chapter 4 Operation — Menu settings
– 76 –