Panasonic AJ-CX4000G Operating Instructions Manual page 105

The items that can be set are as follows.
f [−100]...[100]
(Factory setting: [0])
[H PHASE FINE]
Performs fine adjustment to match horizontal synchronization phase when building a system.
The items that can be set are as follows.
f [−100]...[100]
(Factory setting: [0])
[COLOR BARS]
[COLOR BARS TYPE]
Sets the color bar to be used.
[SMPTE]
[FULL]
(Factory setting: [SMPTE])
@
NOTE
t A smear may occur depending on the output resolution.
[TEST TONE]
Sets whether the audio test signal (tone signal with specification level 1 kHz) is output when the video is switched to the color bar.
The standard level varies depending on the setting of the [AUDIO] menu → [REC CH SETTINGS] → [HEAD ROOM].
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [ON])
[LED]
[REC TALLY]
Selects the method to display recording status at the camera.
[RED]
[GREEN]
[CHAR]
(Factory setting: [RED])
@
NOTE
t If set to [GREEN] or [CHAR], the front tally lamp, back tally lamp and rear tally lamp of the viewfinder do not illuminate while this camera is recording.
[ACCESS LED]
Sets whether the card access lamp is to illuminate or not.
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [ON])
[LAN LED]
Sets whether to illuminate the LAN connector lamp.
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [ON])
[STREAMING LED]
Sets whether to illuminate the <STREAMING> lamp.
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [ON])
[CLOCK]
[CLOCK SETTING]
Sets the calendar (date of the internal clock) and time.
Year
Month
Day
Hour
Chapter 4 Operation — Menu settings
Uses the color bars in SMPTE standard.
Uses the full color bars.
The red tally lamp illuminates.
The green tally lamp illuminates. (Only in viewfinder)
REC is displayed in characters in the viewfinder and the LCD monitor.
[2019]...[2037]
[JAN]...[DEC] ([1]...[12])
[1]...[31] ([28], [29], [30])
[0]...[23]
– 105 –