Menu Description And Setting Options; Operation Screen - Siemens Sinamics GM150 6SL3835-2LN44-2AA0 Operating And Installation Instructions

Operation
8.3 Operation via the AOP30 operator panel
The following access levels are possible:
Access level
1: Standard
2: Extended
3: Expert
4: Special access
1. Press the <▲> or <▼> function key to select the "Access level" function.
2. Press the <Change> function key to select the desired access level.
3. Press the <Back> function key to exit the menu.
8.3.3

Menu description and setting options

The individual menus of the AOPs with their setting options are described in the following.
To make things easier for you, the respective section of the menu structure is illustrated at the
beginning of each chapter.
8.3.3.1

Operation screen

The menu structure of the operation screen
Figure 8-5
122
Functions
Sufficient for simple applications. The default setting is "1 standard".
The structure of the function can be changed by interconnecting BICO parame‐
ters. Only experts should make this setting.
This setting is only used for service purposes. A password is required upon acti‐
vation.
Note
Changing the access levels
During the device commissioning, prior to a change of the access level, e.g. from access
level 2 to access level 3, select the status "0: ready)".
For further information, refer to the Commissioning / service device commissioning section.
Menu structure of the operation screens
SINAMICS GM150 6SL3835-2LN44-2AA0
Operating Instructions Rev.201910281250 MUSTER