Commissioning / Service - Aop Settings - Siemens Sinamics GM150 6SL3835-2LN44-2AA0 Operating And Installation Instructions

Operation
8.3 Operation via the AOP30 operator panel
Resetting the fan runtime
In this menu, you can reset the fan counter. The fan counter must be reset after a fan
replacement.
1. Press the <▼> function key to select the "Reset runtime" row.
2. Confirm the selection with <OK>. The reset of the fan runtime also clears alarm A30042.
8.3.3.6

Commissioning / Service - AOP settings

Commissioning /Service / AOP settings menu structure
Figure 8-12
Calling up AOP settings
1. Press the <<MENU>> key.
2. Press the <▼> function key to select the "Commissioning/Service" row. Press the <OK>
3. Press the <▼> function key to select the "AOP settings" row. Press the <OK> function key
4. Press the ▲ or ▼ function key to select the desired setting. Press the <OK> function key to
* The "Extended settings" menu appears only when the "special access" access level is
selected.
134
Commissioning /Service / AOP settings menu structure
function key to confirm the selection.
to confirm the selection.
confirm the selection.
SINAMICS GM150 6SL3835-2LN44-2AA0
Operating Instructions Rev.201910281250 MUSTER