Replacing The Operator Panel - Siemens Sinamics GM150 6SL3835-2LN44-2AA0 Operating And Installation Instructions

9.5.3

Replacing the operator panel

①
②
③
Figure 9-11
To replace the operator panel, proceed as follows:
1. Switch off the main circuit-breaker.
2. Open the cabinet.
3. Disconnect the power supply
4. Press the retaining lugs
5. Snap on a new operator panel.
6. Attach the connectors for the power supply and communications cable.
SINAMICS GM150 6SL3835-2LN44-2AA0
Operating Instructions Rev.201910281250 MUSTER
Power supply
Communication cable
Retaining lug
Replacing the operator panel
③
①
and communication cable
and withdraw the operator panel to the front.
Maintenance
9.5 Repair
②
at the operator panel.
195