Figure 6-7 Connecting The External Encoder To The Smc30 Sensor Module - Siemens Sinamics GM150 6SL3835-2LN44-2AA0 Operating And Installation Instructions

Electrical connection
6.5 Connection
5. Connect the shield of the encoder cable directly to the shielding bus (serrated bar). It is
6. Attach the shield of the connecting cable to the module
Connection example 1: HTL encoder, bipolar, with reference signal
Figure 6-8
98
important here to establish the greatest possible area of contact and a good conductive
connection.
secure the shield in place.
Figure 6-7 Connecting the external encoder to the SMC30 Sensor Module
Connection example 1: HTL encoder, bipolar, with reference signal
②
. Use metal ground clamps to
SINAMICS GM150 6SL3835-2LN44-2AA0
Operating Instructions Rev.201910281250 MUSTER