Checking The Load Handling Attachments; Figure 4-1 Example Of Attaching And Displaying The Shock And Tilt Indicators - Siemens Sinamics GM150 6SL3835-2LN44-2AA0 Operating And Installation Instructions

Location and display of the indicators
You can find the indicators at the following locations:
● The tilt indicators are located in the upper third of the cabinet.
● The shock indicators are located at the bottom of the cabinet.
4.2.3

Checking the load handling attachments

Check the load suspension devices before lifting and transporting (such as lifting lugs and
eyebolts) and the lifting gear:
● Inspect the load suspension devices attached to the equipment for possible damage.
● Before use, check that the load suspension devices are correctly attached.
● When lifting, use only approved and undamaged lifting gear of sufficient rated capacity.
SINAMICS GM150 6SL3835-2LN44-2AA0
Operating Instructions Rev.201910281250 MUSTER
If the arrow above the line
②
If one or both arrows
Figure 4-1 Example of attaching and displaying the shock and tilt indicators
Replace load suspension devices if they are damaged.
Check the lifting gear prior to its use.
WARNING
Danger to life as a result of damaged load suspension devices and lifting gear
If the load suspension devices and lifting gear are damaged or not correctly secured, then
the equipment may fall while being lifted and transported. This can result in death, serious
injury or material damage.
● Inspect the load handling attachments and lifting gear before use.
4.2 Inspections when receiving the delivery
①
is blued, the tilt indicator has tripped.
are black, the shock indicator has tripped.
Preparations for use
63