Figure 9-19 Busbar - Siemens Sinamics GM150 6SL3835-2LN44-2AA0 Operating And Installation Instructions

Mounting the busbars
1. Prior to mounting, insert the supplied long screws through the respective holes of the busbar.
2. Screw the busbars tightly in the cabinet. Note the installation position of the busbars at the
3. Fasten the phase module to the busbar.
SINAMICS GM150 6SL3835-2LN44-2AA0
Operating Instructions Rev.201910281250 MUSTER
upper phase module. Unlike the installation of the busbars at the center and lower phase
module, the long end of the busbar must point forwards for the upper phase module.
Note
To allow the upper busbars to be installed, you must remove the fan.
①
Long side
②
Short side
Figure 9-19 Busbar
The following figure shows the installed busbars in the dismantled state of the phase
module.
①
Phase module top
②
Phase module center and bottom
Figure 9-20 Installing the busbars
Maintenance
9.5 Repair
201