Unpacking; Removing The Packaging; Figure 4-5 Transporting A Transportation Unit (Still In Packaging) With A Crane - Siemens Sinamics GM150 6SL3835-2LN44-2AA0 Operating And Installation Instructions

3. Pay attention to the center of gravity imprinted on the box
4. Carefully raise the transportation unit.
4.4

Unpacking

4.4.1

Removing the packaging

NOTICE
Material damage caused by incorrect storage of unpacked equipment
Proper packaging ensures that the equipment is protected. Unpackaged equipment may be
damaged if it is stored or out of service over a long period.
● Carefully comply with the instructions for storage in Chapters "Storage" and "Technical
● Remove the packaging immediately prior to installation.
The units are packed by the manufacturers in accordance with the order.
SINAMICS GM150 6SL3835-2LN44-2AA0
Operating Instructions Rev.201910281250 MUSTER
③
the ropes .
①
Spreader beam
②
Center of gravity
③
Imprinted position of the rope
Figure 4-5 Transporting a transportation unit (still in packaging) with a crane
data and drawings".
Preparations for use
4.4 Unpacking
②
and the imprinted position of
69