Figure 9-15 Water Connection - Siemens Sinamics GM150 6SL3835-2LN44-2AA0 Operating And Installation Instructions

Removing the cooling water
1. Place the catchment tray under the pipe union.
2. Close the inlet non-return valve
3. Capture the cooling water (approximately 5 liters) using the catchment tank. Remove all
Removing cables and screwed connections
1. Pull out the fiber-optic conductors.
2. Remove the power supply cables on the transformers.
3. Release the screwed connections
SINAMICS GM150 6SL3835-2LN44-2AA0
Operating Instructions Rev.201910281250 MUSTER
supply and outlet pipes
Figure 9-15 Water connection
water from the phase module.
Figure 9-16 Fiber-optic conductors and power supply cable
on the rear of the IGCT phase module.
④
and the outlet non-return valve
⑥
.
⑦
between the phase module and the busbar package
Maintenance
9.5 Repair
⑤
. Unscrew the water
199