Appendix And Literature; Setting Options In S7T Config For The Parameter Download; Parameter Download Via S7T Config - Siemens SINAMICS S120 Faq

SINAMICS S120 at Technology CPU Entry ID: 21767896
8

Appendix and Literature

8.1

Setting options in S7T Config for the parameter download

For the parameter download and handling of the individual objects
displayed in S7T Config, the following special settings can be made:
Figure 8-1 Download settings in S7T Config
Setting the
objects for the
parameter
download
Selecting
consistency
check before the
download
To display the window for setting these values, select Options in the main
menu and subsequently select Settings...
8.2

Parameter download via S7T Config

Different options are available for downloading the parameter data from
S7T Config, which also depend on the settings listed in Chapter 8.1
Setting options in S7T Config for the parameter download.
It has to be observed that the SINAMICS S120 drive system and the
technology part of the technology CPU are two separate objects and that
the parameters have to be loaded to the respective object.
Download to the SINAMICS S120 drive system
In S7T Config, the context menu of the SINAMICS_S120 object is to be
used for the partial download of parameters and configurations to the
SINAMICS S120 drive system. This ensures that the data are only
transferred to the desired drive system.
After downloading, the data should be backed up via the context menu on
the compact flash card of the drive or the setting for the automatic
activation of the Copy RAM to ROM function should be activated.
V1.0
Commissioning SINAMICS S120
Edition 10/28/05
Appendix and Literature
Automatic
activation of the
Copy RAM to
ROM function
after each
download
53/58