Checking Shock And Tilt Indicators - Siemens Sinamics GM150 6SL3835-2LN44-2AA0 Operating And Installation Instructions

Preparations for use
4.2 Inspections when receiving the delivery
4.2.2

Checking shock and tilt indicators

The purpose of shock and tilt indicators
The unit is equipped with shock and tilt indicators to monitor for damage during transit. It is
essential that you check the shock and tilt indicators before commissioning the unit.
Danger to life as a result of unsafe operation
Safe operation of the device is not guaranteed if the shock or tilt indicator has tripped
(responded)
This can result in death, serious injury or material damage.
● If one of the indicators has tripped, do not perform any commissioning.
● Inform the Technical Support. Only specialist Siemens technicians can recommend
See also
Service & Support (Page 219)
62
WARNING
appropriate measures.
SINAMICS GM150 6SL3835-2LN44-2AA0
Operating Instructions Rev.201910281250 MUSTER