Incubator Heater Replacement; Figure 5-53 Elevating Base - GE Giraffe OmniBed Service Manual

Chapter 5: Repair Procedures

5.9.3 Incubator Heater Replacement

Refer to "Figure 5-51 Heat Sink and Fan", "Figure 5-53 Elevating Base", and "Figure 6-13 Upper Chassis".
Main bracket casting
Lower shroud
Column power cable
Elevating column
Outer column
Lower mounting plate
Bed up/down
pedal switch
Before disconnecting the power, raise the bed to a comfortable working height.
126
12mm screw
Canopy pedal switch

Figure 5-53 Elevating Base

6600-0343-000 104
Upper shroud
Caster
6mm screw
© 2001 by Datex-Ohmeda, Inc.. All rights reserved.