Figure 5-1 Heater Housing Cover And Soffit - GE Giraffe OmniBed Service Manual

Chapter 5: Repair Procedures
Heater door bracket
Left inside cover
Intermediate
oblong locking hole
Housing cover screw
b. Using a 2.5 mm hex key, remove the four screws that secure the heater housing cover to the heater
door bracket. Remove the heater housing cover. Save the four screws and heater housing cover for
later reinstallation.
72
Canopy bracket
Soffit
Arrow clip

Figure 5-1 Heater Housing Cover and Soffit

6600-0343-000 104
Heater housing cover
Right inside cover
Canopy
© 2001 by Datex-Ohmeda, Inc.. All rights reserved.