Configuration procedure
Follow these steps to configure the RMON alarm function:
To do...
Enter system view
Create an event entry in
the event table
Create an entry in the
alarm table
Create an entry in the
private alarm table
NOTE:
•
A new entry cannot be created if its parameters are identical with the corresponding parameters of an
existing entry. If the created entry is a history entry, it will be compared with the existing history entries
only on the same interface. See
The system limits the total number of each type of entries (see
•
the total number of an entry reaches the maximum number of entries that can be created, the creation
fails.
Table 8 Restrictions on the configuration of RMON
Entry
Event
Alarm
Prialarm
Displaying and maintaining RMON
To do...
Display RMON statistics
Use the command...
system-view
rmon event entry-number [ description string ] { log | log-trap
log-trapcommunity | none | trap trap-community } [ owner
text ]
rmon alarm entry-number alarm-variable sampling-interval
{ absolute | delta } rising-threshold threshold-value1
event-entry1 falling-threshold threshold-value2 event-entry2
[ owner text ]
rmon prialarm entry-number prialarm-formula prialarm-des
sampling-interval { absolute | changeratio | delta }
rising-threshold threshold-value1 event-entry1
falling-threshold threshold-value2 event-entry2 entrytype
{ forever | cycle cycle-period } [ owner text ]
Table 8
Parameters to be compared
Event description (description string), event type (log, trap, logtrap or
none) and community name (trap-community or log-trapcommunity)
Alarm variable (alarm-variable), sampling interval
(sampling-interval), sampling type (absolute or delta), rising
threshold (threshold-value1) and falling threshold (threshold-value2)
Alarm variable formula (alarm-variable), sampling interval
(sampling-interval), sampling type (absolute, changeratio or delta),
rising threshold (threshold-value1) and falling threshold
(threshold-value2)
Use the command...
display rmon statistics [ interface-type
interface-number ] [ | { begin | exclude | include }
regular-expression ]
for the parameters to be compared for different entries.
Table 8
78
Remarks
—
Required
Required
Use at least one
command.
for the detailed numbers). When
Maximum number of
entries that can be
created
60
60
50
Remarks
Available in any view