To do...
Configure the destination
address of probe packets
Configure the source IP
address of probe packets
Configure optional
parameters
Configuring the collaboration function
Collaboration is implemented by establishing reaction entries to monitor the detection results of a test
group. If the number of consecutive probe failures reaches the threshold, the configured action is
triggered.
Follow these steps to configure the collaboration function:
To do...
Enter system view
Enter NQA test group view
Enter test type view of the test
group
Configure a reaction entry
Exit to system view
Configure a track entry and
associate it with the reaction entry
of the NQA test group
Configuring threshold monitoring
Configuration prerequisites
Before you configure threshold monitoring, complete the following tasks:
Configure the destination address of the trap message by using the snmp-agent target-host
•
command. For more information about the snmp-agent target-host command, see Network
Management and Monitoring Command Reference.
Create an NQA test group and configure the related parameters.
•
Use the command...
destination ip ip-address
source ip ip-address
See
"Configuring optional
parameters for an NQA
test
group"
Use the command...
system-view
nqa entry admin-name
operation-tag
type { dhcp | dlsw | dns | ftp |
http | icmp-echo | snmp | tcp |
udp-echo }
reaction item-number
checked-element probe-fail
threshold-type consecutive
consecutive-occurrences
action-type trigger-only
quit
track entry-number nqa entry
admin-name operation-tag
reaction item-number
131
Remarks
Required
By default, no destination IP address is
configured.
Optional
By default, no source IP address is specified.
The source IP address must be the IP address of a
local interface. The local interface must be up;
otherwise, no probe packets can be sent out.
Optional
Remarks
—
—
The collaboration function is not
supported in UDP jitter and voice
tests.
Required
Not created by default.
You cannot modify the content of
an existing reaction entry.
—
Required
Not created by default.