H3C S3100V2-52TP Configuration Manual page 60

Saving security logs into the security log file
With this feature enabled, when the system outputs the system information to a specified destination, it
copies the security logs at the same time and saves them into the security log file buffer. Then, the system
writes the contents of the security log file buffer into the security log file at a specified frequency (the
security log administrator can trigger the saving of security logs into the log file manually). After the
contents of the buffer are saved into the security log file successfully, the security log file buffer is cleared
immediately.
The size of the security log file is limited. When the size of the security log file reaches the predefined
maximum value, the system deletes the oldest information and then writes the new information into the
security log file. To avoid security log file loss, you can set the alarm threshold of the security log file
usage. When the alarm threshold is reached, the system outputs the log information to inform the
administrator. In this case, the administrator can log in to the device as the security log administrator, and
then back up the security log file, preventing the loss of important historical data.
By default, the saving of security logs into the security log file is disabled. The parameters, such as the
saving frequency, the maximum size and the alarm threshold of the security log file usage, have their
default settings. To modify these parameters, you need to log in to the device as the system administrator,
and then follow the steps in the following table to configure the related parameters:
Table 5 Save security logs into the security log file
To do...
Enter system view
Enable the information center
Enable the saving of the
security logs into the security
log file
Set the frequency with which
the system saves the security
log file
Set the maximum storage
space reserved for the
security log file
Set the alarm threshold of the
security log file usage
Managing the security log file
After passing the AAA local authentication, the security log administrator can perform the following
operations:
Table 6 Manage the security log file
To do...
Display the summary of the security
log file
Use the command...
system-view
info-center enable
info-center security-logfile
enable
info-center security-logfile
frequency freq-sec
info-center security-logfile
size-quota size
info-center security-logfile
alarm-threshold usage
Use the command...
display security-logfile
summary [ | { begin | exclude
| include } regular-expression ]
48
Remarks
—
Optional
Enabled by default.
Required
Disabled by default.
Optional
The default value is 600 seconds.
Optional
The default value is 1 MB.
Optional
80 by default. (That is, when the usage of the
security log file reaches 80%, the system will
inform the user.)
Remarks
Optional