Outputting System Information To A Log Host - H3C S3100V2-52TP Configuration Manual

To do...
Enable information center
Name the channel with a
specified channel number
Configure the channel
through which system
information can be output
to a monitor terminal
Configure the output rules
of the system information
Configure the format of the
time stamp
Enabling the display of system information on a monitor terminal
After setting to output system information to a monitor terminal, you need to enable the associated
display function in order to display the output information on the monitor terminal.
Follow these steps to enable the display of system information on a monitor terminal:
To do...
Enable the monitoring of system
information on a monitor terminal
Enable the display of debugging
information on a monitor terminal
Enable the display of log
information on a monitor terminal
Enable the display of trap
information on a monitor terminal

Outputting system information to a log host

To do...
Enter system view
Enable information center
Name the channel with a
specified channel number
Use the command...
info-center enable
info-center channel channel-number
name channel-name
info-center monitor channel
{ channel-number | channel-name }
info-center source { module-name |
default } channel { channel-number
| channel-name } [ debug { level
severity | state state } * | log { level
severity | state state } * | trap { level
severity | state state } * ] *
info-center timestamp { debugging
| log | trap } { boot | date | none }
Use the command...
terminal monitor
terminal debugging
terminal logging
terminal trapping
Use the command...
system-view
info-center enable
info-center channel
channel-number name
channel-name
42
Remarks
Optional
Enabled by default
Optional
See Table 2 for default channel names.
Optional
By default, system information is output to
the monitor terminal through channel 1
(known as monitor).
Optional
See "Default output rules of system
information."
Optional
By default, the time stamp format for log,
trap and debugging information is date.
Remarks
Required
Enabled on the console and disabled on the
monitor terminal by default.
Required
Disabled by default
Optional
Enabled by default
Optional
Enabled by default
Remarks
—
Optional
Enabled by default
Optional
See Table 2 for default channel names.