Dhcp Test Configuration Example - H3C S3100V2-52TP Configuration Manual

# Stop the ICMP echo tests after a period of time.
[DeviceA] undo nqa schedule admin test
# Display the results of the last ICMP echo test.
[DeviceA] display nqa result admin test
NQA entry (admin admin, tag test) test results:
Destination IP address: 10.2.2.2
Send operation times: 10
Min/Max/Average round trip time: 2/5/3
Square-Sum of round trip time: 96
Last succeeded probe time: 2011-01-23 15:00:01.2
Extended results:
Packet loss in test: 0%
Failures due to timeout: 0
Failures due to disconnect: 0
Failures due to no connection: 0
Failures due to sequence error: 0
Failures due to internal error: 0
Failures due to other errors: 0
Packet(s) arrived late: 0
# Display the history of ICMP echo tests.
[DeviceA] display nqa history admin test
NQA entry (admin admin, tag test) history record(s):
Index
370
369
368
367
366
365
364
363
362
361

DHCP Test configuration example

Network requirements
As shown in
address from the DHCP server (Device B).
Figure 43 Network diagram
Response Status
3 Succeeded
3 Succeeded
3 Succeeded
5 Succeeded
3 Succeeded
3 Succeeded
3 Succeeded
2 Succeeded
3 Succeeded
2 Succeeded
Figure 43, configure NQA DHCP tests to test the time required for Device A to obtain an IP
Receive response times: 10
Time
2011-01-23 15:00:01.2
2011-01-23 15:00:01.2
2011-01-23 15:00:01.2
2011-01-23 15:00:01.2
2011-01-23 15:00:01.2
2011-01-23 15:00:01.2
2011-01-23 15:00:01.1
2011-01-23 15:00:01.1
2011-01-23 15:00:01.1
2011-01-23 15:00:01.1
138