Outputting System Information To The Log Buffer - H3C S3100V2-52TP Configuration Manual

To do...
Configure the channel
through which system
information can be output
to the trap buffer and
specify the buffer size
Configure the output rules
of the system information
Configure the format of the
time stamp

Outputting system information to the log buffer

NOTE:
The log buffer accepts only log and debugging information; it discards trap information even if you have
configured to output it to the log buffer.
To do...
Enter system view
Enable information center
Name the channel with a
specified channel number
Configure the channel
through which system
information can be output
to the log buffer and
specify the buffer size
Configure the output rules
of the system information
Configure the format of the
time stamp
Use the command...
info-center trapbuffer [ channel
{ channel-number | channel-name } |
size buffersize ] *
info-center source { module-name |
default } channel { channel-number |
channel-name } [ debug { level severity
| state state } * | log { level severity |
state state } * | trap { level severity |
state state } * ] *
info-center timestamp { debugging |
log | trap } { boot | date | none }
Use the command...
system-view
info-center enable
info-center channel channel-number
name channel-name
info-center logbuffer [ channel
{ channel-number | channel-name } |
size buffersize ] *
info-center source { module-name |
default } channel { channel-number |
channel-name } [ debug { level severity
| state state } * | log { level severity |
state state } * | trap { level severity |
state state } * ] *
info-center timestamp { debugging |
log | trap } { boot | date | none }
44
Remarks
Optional
By default, system information is output
to the trap buffer through channel 3
(known as trapbuffer) and the default
buffer size is 256.
Optional
See "Default output rules of system
information."
Optional
The time stamp format for log, trap and
debugging information is date by
default.
Remarks
—
Optional
Enabled by default.
Optional
See Table 2 for default channel names.
Optional
By default, system information is output
to the log buffer through channel 4
(known as logbuffer) and the default
buffer size is 512.
Optional
See "Default output rules of system
information."
Optional
The time stamp format for log, trap and
debugging information is date by
default.