Bacnet Object Id - Honeywell Centraline FALCON User Manual

FALCON
EN2Z-0962GE51 R0715
BACnet Object Object Type
Anlog input 0
Anlog output 1
Anlog value 2
Averaging 18
Binary input 3
Binary output 4
Binary value 5
Calendar 6
Command 7
Device 8
Event enrollment 9
File 10
Group 11
Life safety point 21
Life safety zone 22
Loop 12
Multi-state input 13
Multi-state ourput 14
Multi-state value 19
Notification class 15
Program 16
Schedule 17
Trend log 20
Datapoint Type
User Interface
Editing
Equivalent
The BACnet object ID is part of the internal BACnet addressing in every BACnet
system (BACnet communication). The BACnet object ID is not visible in the Excel
Web HTML Interface and the user does not need the BACnet object ID in order to
operate the Excel Web controller.
The BACnet object ID is a unique ID within a BACnet device.
BACnet Object IDs must be provided by or to the project engineer/vendor who is
rd
responsible for the 3 party BACnet device to be added to the CARE project, or who
is responsible for integrating the Excel Web controller into a 3
system.
The BACnet object ID will be kept unique within a CARE project and is calculated
within CARE by the following Standard BACnet formula:
BACnet object ID = BACnet object type x 2
The typical object addressing within a BACnet system is done by using the device
ID and the Object ID.
50
AI AO AV BI BO BV MI MO MV PC RI RO
HTML Interface
22
+ Object Instance number
USER GUIDE

BACnet Object ID

CARE
-
rd
party BACnet