Setting The Device Id - Honeywell 5496 Installation And Operation Manual

Model 5496 Intelligent Power Module Installation and Operation Manual 151276-L8
3.3.1

Setting the Device ID

All SBUS modules in the system must have a unique number (1-31) to identify them
to the FACP. Use the DIP switch on the 5496 board to set the module ID number.
Figure 2-1 shows the location of the dipswitch on the board. Figure 3-4 shows
dipswitch setting and the corresponding module ID numbers.
Figure 3-4 Possible Module Addresses
3-4