Datapoints; View Datapoint List - Honeywell Centraline FALCON User Manual

FALCON
EN2Z-0962GE51 R0715
Please refer also to the "Time Programs" section, p. 42.
Datapoint lists can be displayed for all plants or for a particular plant.
Procedure 1. In the tree, expand the Advanced item and navigate to the Datapoints item,
either on level of all plants or on level of a particular single plant.
2. In the tree, click on Datapoints.
RESULT:
3. Under Datapoint Filter, select the point types that should be displayed, as
follows
e. Check Points in Alarm or Points in Manual.
f. Under Type, check/uncheck specific datapoint types to be included/excluded
from the filter.
g. Under Name, specific datapoint names can be filtered by entering a search
text. By default all datapoints will be displayed as indicated by an asterisk. To
display specific datapoint (names), enter the appropriate search text.
h. Click the GO Button to apply the filter.
RESULT:
On the right, the datapoints are listed on the Datapoints tab. You
can display specific datapoints and their properties by applying a
filter. For each datapoint its details can be viewed and edited.
In the Datapoint List, all datapoints matching the filter criteria will
be displayed.
182
USER GUIDE

Datapoints

View Datapoint List