Time Of Last Reset; Transition Events; Type; With Switches / 3 Position Output - Honeywell Centraline FALCON User Manual

FALCON
EN2Z-0962GE51 R0715
Datapoint Type
User Interface
Editing
Equivalent
Shows the time of the last reset of a binary output or pulse converter datapoint.
Datapoint Type
User Interface
Editing
Equivalent
Defines which transition type (To-Off-Normal, Back To-Normal, and/or To Fault) will
be reported and tracked by time stamping. The timestamps can be seen in the Excel
Web HTML Interface.
See also "Event" and "Reporting" sections.
Datapoint Type
User Interface
Editing
Equivalent
Shows the datapoint type, e.g. analog input, digital output, etc.
Datapoint Type
User Interface
Editing
Equivalent
The With Switches / 3 Position Output options are not visible in the Excel Web
HTML Interface, but only in CARE.
Defines whether the point transmites a continuous signal and is on a board with
switches (AO, BO), or if the point is a 3 position output (AO).
Datapoint Type
User Interface
Editing
Equivalent
The write access level can be defined and changed in CARE only. In the Excel Web
HTML Interface, the write access level is displayed only.
The write access level assigned to a datapoint determines which user level can write
values (properties) to that particular datapoint on the Excel Web HTML Interface.
70
AI AO AV BI BO BV MI MO MV PC RI RO
HTML Interface
-
AI AO AV BI BO BV MI MO MV PC RI RO
HTML Interface
"see Reporting"
Event
AI AO AV BI BO BV MI MO MV PC RI RO
HTML Interface
-

With Switches / 3 Position Output

AI AO AV BI BO BV MI MO MV PC RI RO
HTML Interface
AI AO AV BI BO BV MI MO MV PC RI RO
HTML Interface
-
USER GUIDE

Time of Last Reset

CARE

Transition Events

CARE
x

Type

CARE
CARE
x

Write Access Level

CARE
x