Honeywell Centraline FALCON User Manual page 147

USER GUIDE
a. In the Assigned Points list or in the Assignable Points list, highlight the points
to be moved. Multiselection by using the CTRL or the SHIFT key is possible.
b. Click the SINGLE ARROW button with desired direction.
Or,
c. To move all points in one step,
d. Click the DOUBLE ARROW button with desired direction.
NOTE: Only those datapoints are displayed of which read access level is
equal to or lower than the read access level of the user.
14. To change the row sort order in the fast access list, use the MOVE UP and
MOVE DOWN buttons. Multiselection by using the CTRL or the SHIFT key is
possible.
15. Click on the Assign Parameters tab.
Here can you configure the parameter filter for assigning parameters to the fast
access list. Filtering is possible for control loops on plant level. Filter criteria are
parameter path and parameter name. All parameters matching the filter criteria
will be displayed in the Assignable Parameters list.
16. From the Plant drop-down list box, select the plant.
17. Under Control Loops, select control loop(s) by clicking the BROWSE button.
18. In the Parameter Path field, parameters can be filtered by their path.
143
FALCON
EN2Z-0962GE51 R0715