Table of Contents
Advertisement
FALCON
EN2Z-0962GE51 R0715
4. Under Transitions, check the transition events that should trigger the event
enrollment alarming. Refer to the relevant To-Off-Normal transitiona listed
under BACnet Device State(s).
Example:
When selecting ´To-Off-Normal`, each transition from
´EMAIL_INPROCESS` (Normal State) to any of the Off-Normal
States, for example ´EMAIL_FAILED`, will cause an event
enrollment alarm.
5. In the Time delay field, enter a time delay in sec. The event enrollment alarm
will be sent after the time entered here, has been elapsed.
6. Click SUBMIT button.
7. To view general event enrollment properties, click the General tab. Here the
following properties set in CARE are shown:
• Object Type
• Description
• Read Access Level
• Write Access Level
248
USER GUIDE
Hide quick links:
Advertisement
Table of Contents
