Display Controller Information - Honeywell Centraline FALCON User Manual

FALCON
EN2Z-0962GE51 R0715
Procedure 1. In the tree on the left, click on the controller.
RESULT:
• Units of Measurement
International or Imperial (English). This selection affects the
operation of the icons in Control Strategy that perform EMS
operations. The values for the inputs and outputs are
different depending on the selection of International or
English units.
• Character Set
The appropriate character set is necessary for unobstructed
communication between devices on the BACnet bus. For
proper communication between Excel Web controllers and
the EBI central, the ANSI (or ISO Latin I) character set must
have been selected in CARE.
On the General tab on the right, general controller data are
displayed:
Controller Information
Shows controller specific properties such as:
• Controller Name
• Device ID
Object identifier of the BACnet device object. This is a unique
ID is issued by CARE for any device on the BACnet bus. If
the BACnet device is an Excel Web controller, the device ID
is the same as the controller number.
NOTE:
rd
When integrating 3
ensured that no identical device IDs exist in the whole
BACnet system. For that reason, an offset can be defined.
Adding this offset to the controller number generates the
device ID.
• Location
Additional Text for the controller, which indicates the location
of the controller, e.g. Floor 4, Section Nord.
136
USER GUIDE

Display Controller Information

party BACnet devices, it must be