Honeywell Centraline FALCON User Manual page 146

FALCON
EN2Z-0962GE51 R0715
8. From the Read Access Level and Write Access Level drop-down list boxes,
select the user levels that should have read and write access of the fast access
list.
9. If you have selected the fast access list type ´Selected Points/Parameters`,
continue with step 10. If you have selected the fast access list type ´Filter
Template`, continue with step 33.
10. Click on the Assign Datapoints tab.
11. Under Point Filter, select the point types that should be used in the fast access
list, as follows:
a. Under Plant, select plant(s) of which datapoints you want to be displayed by
clicking the BROWSE button and selecting the plants in the Select Plants
dialog box.
RESULT: Only the datapoints belonging to these plant(s) will be shown.
b. Under Type, check/uncheck specific datapoint types to be included/excluded
from the filter.
c. Under Name, specific datapoint names can be filtered by entering a search
text. By default all datapoints will be displayed as indicated by an asterisk.
To display specific datapoint (names), enter the appropriate search text.
12. Click the GO Button to apply the filter.
RESULT: In the Assignable Points list, all datapoints matching the filter
criteria will be displayed.
In the Assigned Points list, already-assigned datapoints are
displayed.
13. To move points between lists, that is, to make them assigned or assignable, do
one of the following:
142
USER GUIDE