Honeywell Centraline FALCON User Manual page 166

FALCON
EN2Z-0962GE51 R0715
26. To change details of a switched property, click the switched property, then click
the DETAILS button, and then change desired value/option on the Values tab in
the Details dialog box of the datapoint.
27. To define a schedule default value, enter the value in the Schedule Default
Value field, or check the NULL checkbox. The schedule default value is used at
12.00 AM as present value of all switched properties when no other value is in
effect. The schedule default value can be any value or NULL. The NULL value
removes the current value entry of the switched properties from the priority
array. Then the next lower value in the priority array becomes the present value
of the switched properties.
NOTE: You must enter a schedule default value.
28. To manually override the present value, check the Out of Service check box,
and then enter the value in the Manual field, or check the NULL checkbox right
to the Manual field.
29. Continue by clicking the Weekly Program tab.
On the Weekly Program tab, you create the weekly program that should be
performed during the schedule period defined on the Details tab.
162
USER GUIDE