Honeywell Centraline FALCON User Manual page 153

USER GUIDE
35. Under Template Configuration, configure the filter template by selecting the
plant and point types that should be displayed (filter criteria) in the fast access
list as follows:
Under Plant, select plant(s) of which datapoints you want to be displayed by
clicking the BROWSE button. Only the datapoints belonging to these plant(s)
will be shown.
Under Type, check/uncheck specific datapoint types to be included/excluded
from the filter.
Under Name, specific datapoint names can be filtered by entering a search text.
By default all datapoints will be displayed as indicated by an asterisk. To display
specific datapoint (names), enter the appropriate search text.
Under Sort Order, define the sort order for the list by selecting the column titles
and the sorting mode. For the basic naming of the column titles, see the
Configure Column tab description in the following steps.
36. Click the GO Button to apply the filter. All datapoints matching the filter criteria
will be displayed under Matching Points.
NOTE: Only those datapoints are displayed of which read access level is
equal to or lower than the read access level of the user.
37. Click on the Configure Columns tab.
149
FALCON
EN2Z-0962GE51 R0715