Honeywell Centraline FALCON User Manual page 154

FALCON
EN2Z-0962GE51 R0715
Here you can configure the columns display for the datapoints list of the fast
access list by selecting the column titles and the column order.
The Available Columns list shows the max. number of available columns. The
Visible Columns list shows the columns of which the datapoints list consists.
Column display will be configured by moving the columns between the
Available Columns list and Visible Columns list.
38. To move column(s) between lists, that is, to make them visible or not, do one of
the following:
a. To move single column(s),
b. In the Available Columns list or in the Visible Columns list, highlight the
columns to be moved. Multiselection by using the CTRL or the SHIFT key is
possible.
c. Click the SINGLE ARROW button with desired direction.
Or,
d. To move all column(s) in one step,
Click the DOUBLE ARROW button with desired direction.
NOTE: Columns marked with an asterisk * cannot be removed from the
Visible Columns list.
e. To set the display order in the Visible Columns list, highlight the column and
use the MOVE UP and MOVE DOWN buttons.
39. Click the SUBMIT button to save settings done on the General, Assign
Datapoints and Configure Columns tabs.
40. Click the BACK button.
RESULT: The fast access list is displayed on the Fast Access Lists tab. To
modify a fast access list, please refer to the "View/Modify Fast
Access List" section.
150
USER GUIDE