Honeywell Centraline FALCON User Manual page 162

FALCON
EN2Z-0962GE51 R0715
Datapoints are selected/deselected from switching status by moving them
between the Assignable Datapoints and the Switched Properties list.
12. To move datapoints between lists, that is, to make them switched or not, do one
of the following:
a. To move single datapoint(s),
Highlight the datapoint(s) to be moved in the Assignable Datapoints list.
Multiselection by using the CTRL or the SHIFT key is possible.
b. Or, click the checkbox at the point name in the Switched Properties list.
c. Click the SINGLE ARROW button with desired direction.
Or,
d. To move all datapoints in one step,
Click the DOUBLE ARROW button with desired direction.
13. Under Switched Properties, select the property from the Property drop-down
list box for each datapoint.
NOTE: Software performs consistency checking for datapoint type, property
and engineering unit. This ensures that the engineering unit
corresponds to the property to be switched and prevents the same
schedule from switching
• datapoints of different types (AO and BO), or
• different properties (e.g. present value and low alarm limit) of
the same datapoint, or
If any of these items do not match, the corresponding lines are marked
with an inconsistency warning.
14. To save settings, click the OK button.
RESULT: The New / Edit Schedule dialog box displays.
158
USER GUIDE