View/Change Communication Settings - Honeywell Centraline FALCON User Manual

USER GUIDE
Communication settings include:
• Interface settings for serial ports, Ethernet, LON, Modem and Web-Server, such
as baudrate, IP address, neuron chip ID, automatic logout time of web server
• User name and password definition
• Selection of the serial port for modem connection
• Selection of remote front-end
• Dial out parameter (re-dial algorithm) definition
• E-Mail Alarming
Procedure 1. In the tree, expand the Advanced item, then the System Settings item and click
on Communication.
RESULT:

View/Change Communication Settings

On the Interface Settings tab you can view the Ethernet and LON
bus settings in the areas of the same name. In addition, you can set
baudrate of the serial ports and the logout time of the web server
(controller).
207
FALCON
EN2Z-0962GE51 R0715