Analog Input; Analog Output - Honeywell Centraline FALCON User Manual

FALCON
Recommendation
EN2Z-0962GE51 R0715
B C
B C
NORMAL
A
Set the high and/or low limits to extremely high or low values, so that a real
measured value will not be above the limits.
Always enable the High limit Enable and Low Limit Enable options even if the Off-
Normal Reporting is disabled.
The following diagram shows the alarm behavior of an analog input.
Fig. 17. Alarm behavior of analog input datapoint
The following diagram shows the alarm behavior of an analog output.
104
C
OFF- NORMAL
HIGH LIMIT
LOW LIMIT
Back to Normal
To Fault
USER GUIDE
FAULT
B

Analog Input

Analog Output